Bioaugmentation Pilot Test for Chlorinated Solvent Impacts in Sweden

Geosyntec assisted in the design and implementation of the first use of first bioaugmentation in Sweden for in situ treatment of chlorinated solvents in groundwater. Geosyntec assisted in the design and implementation of the first use of first bioaugmentation in Sweden for in situ treatment of chlorinated solvents in groundwater.

High levels of the chlorinated solvents tetrachloroethene (PCE) and trichloroethene (TCE) occur in groundwater beneath a manufacturing facility in southern Sweden. Regulatory authorities require groundwater remediation, but Swedish environmental consultants had little direct experience with certain in situ remediation technologies.

The team of SWECO VIAK, COWI A/S, and Geosyntec combined forces to evaluate the feasibility of in situ chemical oxidation (ISCO) with permanganate and biological in situ enhanced reductive dechlorination (ERD) using bioaugmentation for treatment of site groundwater. Given that ERD and ISCO are commonly employed for groundwater remediation in neighboring Denmark, these two technologies were chosen for pilot testing at the Sweden site. The objective of the testing was to identify which was the most cost effective and to develop a remedial strategy for full-scale groundwater remediation at the site.

Geosyntec's Scope of Services for a Bioaugmentation Pilot Test

Geosyntec provided technical expertise for a KB-1® bioaugmentation design at the ERD pilot test site and supported evaluation of both the ISCO and ERD pilot tests. KB-1 is a microbial culture containing naturally occurring strains of Dehalococcoides organisms that are used to degrade chlorinated solvents to non-toxic ethene. Although both ISCO and ERD performed well in the pilot tests, it was concluded that ERD is the most cost-effective treatment.

Geosyntec then developed a remedial strategy for design and implementation of a full-scale ERD system that was subsequently approved by the Swedish EPA. Our strategy included a pre-design investigation for mapping the source area using a membrane interface probe along with groundwater modeling to evaluate flow-field impacts of a neighboring municipal extraction well, with an option for incorporating the extraction well as a component in the ERD design.

Notable Accomplishments for a Bioaugmentation Pilot Test

Geosyntec’s involvement in this project led to the first use of bioaugmentation in Sweden for in situ treatment of chlorinated solvents in groundwater. Based on the success of the bioaugmentation pilot test, and with Geosyntec’s support, the Swedish EPA approved ERD as the final remedy for the site.

About Geosyntec

Geosyntec Consultants is a consulting and engineering firm that works with private and public sector clients to address new ventures and complex problems involving our environment, natural resources, and civil infrastructure. Our engineers, geologists, environmental scientists, and other technical and project staff specialize in the areas of environmental studies and cleanup; infrastructure assessment, engineering, and design; environmental, health, and safety management; natural resources assessment and restoration; and structural extreme load analyses, fluid dynamics, and risk mitigation services. We deliver advanced solutions to clients from offices throughout the United States and at select locations in Australia, Canada, Ireland, Malaysia, and the United Kingdom.

Company Information

Geosyntec's engineers, scientists, and innovators create high-value solutions for clients based in the United States, the United Kingdom and across Europe.

Phone & Email:
Visit our contact page

Postal Address:

1st Floor Gatehead Business Park 
Delph New Road 
Delph, OL3 5DE