Chlorinated Solvent DNAPL Bioremediation Pilot Test Demonstration in Denmark

At this highly contaminated pharmaceutical waste disposal site, Geosyntec led the design and implementation of the first rigorous pilot test of enhanced in situ bioremediation of chlorinated solvent DNAPL in Denmark. At this highly contaminated pharmaceutical waste disposal site, Geosyntec led the design and implementation of the first rigorous pilot test of enhanced in situ bioremediation of chlorinated solvent DNAPL in Denmark.

Groundwater supplies beneath the Kærgård Plantage pharmaceutical waste disposal site in Denmark are contaminated with substantial quantities of chlorinated solvents (primarily tetrachloroethene, or PCE), which are present in the subsurface as dense non-aqueous phase liquids (DNAPLs).

Contaminated groundwater from the site discharges to the nearby North Sea, creating a potential human health and ecological risk at a beach adjacent to the site.

Since 2004, Geosyntec Consultants has advised the Danish government regarding the remedial strategy for cleaning up the site and mitigating risks at the beach. At Geosyntec’s recommendation, the Danish authorities retained a team of consultants with a goal of evaluating the feasibility of three technologies for remediating the primary DNAPL source areas at the site: in situ biological enhanced reductive dechlorination (ERD), in situ chemical oxidation with Fenton’s reagent, and in situ thermal remedial via steam flushing.

The ERD pilot test was deemed to be particularly important because the performance of the technology for treatment of highly contaminated DNAPL source areas had not yet been demonstrated in Denmark. While ERD performance for dissolved-phase chlorinated solvents had already been demonstrated within the country, the capabilities of the technology were less certain for DNAPLs. Geosyntec successfully led the negotiations with the Danish EPA that resulted in selection of ERD for pilot testing at Kærgård Plantage.

Geosyntec’s Scope of Services for Chlorinated Solvent DNAPL Bioremediation Pilot Test

As a first step in the ERD design process, Geosyntec designed and directed a bench treatability study at our SiREM Laboratory to confirm treatment of DNAPL in aquifer samples from the site and to quantify parameters for design of an ERD pilot system (e.g., treatment rates with and without bioaugmentation with KB-1®, electron donor and pH buffer dosages). The treatability test successfully confirmed that PCE in site groundwater at a concentration of 30 mg/L could be completely dechlorinated to ethene using ERD, and that bioaugmentation enhanced the process. The test also showed that dechlorination can enhance dissolution of DNAPL at the site.

Subsequently, Geosyntec designed an ERD pilot test system and monitoring program for implementation in one of the DNAPL source areas at the site (a former waste disposal pit). The system we designed involved addition of electron donor (lactate and ethanol) and pH buffer (carbonate and bicarbonate) via continuous groundwater recirculation within a 25-meter-long test area.

Continuous recirculation was deemed necessary to facilitate flushing, DNAPL dissolution, and enhanced delivery of bioremediation additives. After 11 months of operation, greater than 50% of the PCE in the pilot test plot was dechlorinated to cis-1,2-dichloroethene, vinyl chloride, and ethene, and enhanced dissolution of DNAPL was evident. Dechlorination was accompanied by significant growth of dechlorinating bacteria (Dehalococcoides) and isotopic enrichment in 13C chloroethene daughter products.

Notable Accomplishments for Chlorinated Solvent DNAPL Bioremediation Pilot Test

Geosyntec convinced skeptical Danish regulators that ERD could treat chlorinated solvent DNAPL. Our pilot test design, which represents the first rigorous test of ERD for DNAPL bioremediation in Denmark, successfully demonstrated that ERD enhances dechlorination PCE in the field at concentrations > 100 mg/L (i.e., near PCE solubility limits). Our design also showed the importance of continuous pH control in ERD systems treating DNAPL.

About Geosyntec

Geosyntec Consultants is a consulting and engineering firm that works with private and public sector clients to address new ventures and complex problems involving our environment, natural resources, and civil infrastructure. Our engineers, geologists, environmental scientists, and other technical and project staff specialize in the areas of environmental studies and cleanup; infrastructure assessment, engineering, and design; environmental, health, and safety management; natural resources assessment and restoration; and structural extreme load analyses, fluid dynamics, and risk mitigation services. We deliver advanced solutions to clients from offices throughout the United States and at select locations in Australia, Canada, Ireland, Malaysia, and the United Kingdom.

Company Information

Geosyntec's engineers, scientists, and innovators create high-value solutions for clients based in the United States, the United Kingdom and across Europe.

Phone & Email:
Visit our contact page

Postal Address:

1st Floor Gatehead Business Park 
Delph New Road 
Delph, OL3 5DE